Medical Devices
Neobone
®
Synthetic bone substitute with a biphasic mixture of two types of calcium phosphates: β-Tricalcium Phosphate (25%) and Hydroxyapatite (75%).
It is intended to be used in non-load-bearing applications.
-
Sterilized by gamma radiation;
-
Interconnect porosity, allowing the implant vascularization;
-
Rapidly osteointegrated to promote bone regeneration;
-
Available geometries: blocks, wedges and granules.
CE 1011
TriOSS
®
Synthetic bone substitute composed by >95% of β- Tricalcium Phosphate. It is intended to be used in non-load-bearing applications.
-
Sterilized by gamma radiation;
-
Interconnect porosity, allowing the implant vascularization;
-
Rapidly osteointegrated to promote bone regeneration;
-
Available geometries: blocks, wedges and granules.
CE 1011
®
n-IBS
®
Synthetic bone substitute consisting of a hydroxyapatite paste. Intended for use in filling bony voids or gaps of the skeletal system.
-
Sterilized by gamma radiation;
-
Ready-to-use prefilled syringe;
-
Remains as a soft gel throughout the implantation and healing processes;
-
Temporary osteoconductive scaffold for the ingrowth of bone.
CE 1011
Neocement
®
Synthetic bone substitute composed of 3 components: a solid phase of calcium phosphates, a liquid phase and chitosan as adjuvant.
Is a calcium phosphate cement that, upon mixing, hardens in vivo after a few minutes.
It is intended to be used in non-load-bearing applications to fill bone defects fracture reductions and bone reconstructions.
-
Sterilized by gamma irradiation;
-
Results in a hydroxyapatite cement after mixing the components;
-
Easily implanted via simple injection;
-
Rapidly osteointegrated.
CE 1011
Neocement Inject P
®
Calcium phosphate cement composed of 3 components: a solid phase of calcium phosphates, a liquid phase and chitosan as adjuvant. Is presented in an injectable form, allowing its use in non invasive applications.
It is intended to be used in non-load-bearing applications to fill bone defects fracture reductions and bone reconstructions.
-
Sterilized by gamma irradiation;
-
Results in a hydroxyapatite cement after mixing the components;
-
Easily implanted via simple injection;
-
Rapidly osteointegrated.
CE 1011
For detailed information about the indications and contraindications of each device, see the instructions for use.
The devices should only be handled or implanted by qualified and trained physicians, after reading the instructions for use.